Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

15 reviews for Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

1. 

   Rated 5 out of 5

   Anne Heck – December 10, 2018

   We bought this Kit to use with the Mr. Heater 30,000BTU Ventless Blue Flame Propane Heater. We also bought the Mr. Heater 12ft. hose with regulator as we were hooking heater up to a 20# Propane tank. We found it helpful to draw a diagram of all the connections 1/2″ or 3/8″, male or female, flared male ends sometimes. This will show you what you lack and if will need to buy anything additional at the hardware store- and be sure it’s correct for Propane in this case ( “black pipe” steel pipe, or copper tubing and brass fittings- the professionals can tell you precisely, as I am no expert). Also be sure you seal everything well as directed, with yellow gas rated teflon tape and/or gas rated Pipe Dope, and test all connections with dish soap or soapy spray for leaks multiple times. It is great to have the in line Shut off as it adds to the safety of operation IMHO. Also the flex line in this kit really helps with transition from heater -to fitting- to shut off valve- to the long hose to tank (our set up).AS YOU MAY HAVE READ- the main “L” connector that comes with Mr. Heater Ventless Heater can easily strip out and cause havoc so you may want to buy a brass fitting at the store and use that instead! This “L” is NOT part of this kit.This kit was great, and I would recommend it. We did have to use tape on one male “flanged” end (carefully) because it leaked, even though I’d read you don’t usually tape or pipe dope the “flanged” fittings. You DO tape and/or Pipe Dope the MALE end of the fittings (the female are the inner threads of the pipe). I am a novice so please read all instructions and safety instructions and ask a Pro if unsure . A bit confusing at first but making a diagram, numbering the sequence really helped us.

2. 

   Rated 5 out of 5

   Donald H. Williams – November 11, 2022

   Kit works good for small heater in shed

3. 

   Rated 5 out of 5

   Tom Hall – December 2, 2022

   This kit needs a 90 degree elbow. The Mr. Heater connection comes out the bottom and would be great if you wall mount but floor mount needs that 90.

4. 

   Rated 4 out of 5

   John Bridgers Jr. – February 16, 2023

   I like it

5. 

   Rated 5 out of 5

   Bombastus – March 8, 2023

   Well manufactured, looks good and easy to connect Mr. Heater to NG pipe.

6. 

   Rated 5 out of 5

   bonnnie townsend – April 4, 2023

   It connects to the heater u will need this

7. 

   Rated 5 out of 5

   prizum78 – April 5, 2023

   No leaks, no issues, 30 seconds install.

8. 

   Rated 5 out of 5

   Richard C. – April 17, 2023

   Used it on lp gas stove heater for my house when power gets knock out in winter.

9. 

   Rated 4 out of 5

   Ron Cooper – May 7, 2023

   Liked it for easy installation.

10. 

    Rated 5 out of 5

    Becky – May 19, 2023

    This came in a timely manner and it fit our new wall heater perfectly. Thankful I bought it, instead of assuming the old connection would fit the new heater

11. 

    Rated 5 out of 5

    Mike Smith – June 7, 2023

    Fixed my fireplace without any problems. Instead of spending 1000’s for install.

12. 

    Rated 4 out of 5

    Steven Church – June 12, 2023

    Work just fine I got for my gas stove. No problem installing it.

13. 

    Rated 4 out of 5

    Bubba – June 30, 2023

    Worked as intended, great price

14. 

    Rated 5 out of 5

    drrod – July 4, 2023

    Needed additional 90 degree elbow to allow tubing to fit behind fireplace. Didn’t need valve as I already had shutoff so probably could ha saved money and time by getting just those two parts from Lowes

15. 

    Rated 4 out of 5

    Rebecca Wyatt – August 2, 2023

    Great