- Brand: Cadet Manufacturing
- Special Feature: 25 Gauge steel
- Color: White
- Form Factor: Pedestal
- Indoor/Outdoor Usage: Indoor
- 25 Gauge Steel
- 20 Gauge Junction Box With Ground, All Metal, And Powder Coated
- UL Listed Heater
- Requires A Thermostat
- 25 Gauge Steel
- 20 Gauge Junction Box With Ground, All Metal and Powder Coated
- UL Listed Heater




















Stew –
Installed in 20 mins. Ended up getting the thermostat at Home Depot. Impressed with amount of heat it’s giving off but not enough to heat my kitchen on its own which is 14×14 plan to add another at least this size. As per instructions smell of oil burning off is strong so be sure to allow proper ventilation provisional plans.
Beata Gamel –
I like the product. I have purchased others also. Good quality, easy install, good instructions.I noted when I received it, that it was made in Vancouver, Washington. Great! USA made! I also noted that it had been shipped acroos the country to New Jersey, then back across the country to a California Amazon distribution center, Then sent to me in Idaho. Wow! It’s got some miles on it! It did however arrive well packaged, in good condition.
B.L. –
This heater is definitely quality…but the installation and need for additional thermostat is a pain. Previously I had a different 1500W radiant heater which I could leave on a setting of 5 of 10 (750W) to keep a 20×20 room perfectly warm. Installation is also kind of silly. You have to wire the thermostat and it has mounting holes for the WALL and not the baseboard. Unless you configure some kind of spacer..the heater will mount on an angle. I ended up drilling a few holes in the device for screws which went into the baseboard. This item is too much of a pain to send back..so I guess I am out of 60+ bucks including the thermostat. I may give this to someone with a VERY small room.
Kindle Customer –
Would be nice if the unit came with a more sophisticated thermostat. One that had numbers and not dots.
Mai Ta –
Good for a very small room. Not much heat output
Robert –
Wall heater works very well, some eclectic knowledge is needed to wire thermostat. This was installed in a 11ftx13ft bedroom for supplemental heat. Remember this is radiant heat, so it takes a couple of hours to warm up the objects in the room.
Kelly Bishop –
After I ordered this 120V version, I thought I would be better off with the 220V version, but that’s okay; I’ll put it on a 120V circuit along with one other existing 120V Cadet base heater and the total amps with this and one other 120V will be consuming a maximum of less than half of the capacity of that breaker; well within code. Considering your very quick shipping excellence, I’ll receive this order and actually save installation by doing it myself instead of hiring an electrician to do the 220V work because of the 220V breaker that would have been required, so I’ll make this 120V version work out. Thanks for your speedy delivery.
Daniel F. Gibson –
I hooked a thermostat on it and then put it in my long hallway it helps the hallway stay warm